WSA 50 Stucco water binder for floors and wooden surfaces
WSA50 is a filler binder water-based modified acrylic resins. Should be mixed with finer wood dust obtained from the smoothing of the surface being machined (floor or other wood product). It is distinguished by the following characteristics: high filling power, good drying, non-flammable solvents, very low VOC content. This product is suitable for water and solvent based coating systems.
TECHNICAL DATA
Appearance: thick white liquid
Type: modified acrylic resin in water dispersion
Minimum application temperature: +12 ° C
Viscosity (Ford 4): 27/2
Density: 1.05 Kg / lt
Sanding: after 40 minutes at 25 ° C
Application: trowel steel
Mixing ratio: approximately 1:1 with sawdust
Pot Life (MIX): > 2 hours
PACKAGE
PE tank of 5 liters or 10 liters
Technical Sheet
Download the full Technical Sheet Download PDF
Request the Safety Data Sheet by filling in the specific Form
Recommended
- Industry and Building
- Parquet and wooden supports
- For application by brush or roller
Not suitable
- Outdoor
- On non-absorbent surfaces
- On metallic materials